群创 7寸TFT AT070TN83

AT070TN83 V.1 Final Specification2008/11/20Embedded TTL T-con Board with LED DriverINNOLUXContents1. General Specifications2. Pin Assignment3. Operation Specifications.……3. 1. Absolute Maximum Ratings3.2. Typical Operation Conditions3.3. Power Sequence3. 4. Timing Characteristics567883.4.1. Timing conditions342. Timing Diagram.…104. Optical specifications125. Reliability Test Items166. General Precautions6.1. Safety…6.2. Handling73. Static Electricity6. 4. Storage6.5. Cleaning7. Mechanical Drawing188. Package Drawing…8. 1. Packaging Material Table8.2. Packaging Quantity8.3. Packaging Drawing..20量售有,止任何的使用The copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-TT-12Date:2008/1120Page: 1/201. General SpecificationsNoSpecificationRemarkLCD size7.0 inch (Diagonal)2Driver elementa-Si tft active matrix3 Resolution800×3(RGB)X4804 Display modeNormally white, Transmissive5 Dot pitch0.0635W)X0.1905(H)mm6 Active area1524(W)X91.44(H)mm7 Module size165W)×104(H×55(0) mmNote18 Surface treatmentAnti-Glare9 Color arrangementRGB-stripe10 InterfaceDigital (TTL)11 Backlight power consumption 2.500W(Typ.Note 212 Panel power consumption0825W(Typ.)Note 313 Weight130g(Typ.)Note 1: Refer to Mechanical DrawingNote 2: Including LED Driver power consumptionNote 3: Including T-con Board power consumption量售有,止任何的使用The copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-TT-12Date:2008/1120Page: 2/202. Pin AssignmentTtL Connector is used for the module electronic interface the recommended model isFH33-40S-05SH(10), manufactured by HirosePin No. Symbol W/OFunctionRemarkVLEDPower supply for LED DriverLEDP Power supply for LED DriverADJI Adjust the led brightness with PWM PulseNote 1.23456789G1LEDP Ground for LEd circuitLEDGround for led circuitP Power supply for digital circuitCCP Power supply for digital circuitMODEDE or HV mode controlNote 3DEData enableVSVsync signal inpt11HSHsync signal input12GNDPower ground13B5i Blue data input(MSB)14B4Blue data input15B3Blue data input16GNDPower grou17B2I Blue data inputB1Blue data input19BOI Blue data input(LSB)20GNDPower ground21G5Green data input(MSB)22G4lllGreen data input23G3Green data input24GNDPower ground25G2I Green data inputG1时 Green data input的The copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.A070-83-千T-12Date2008/1120Page: 3/2027GOGreen data inplput(LSB)28GNDP Power ground29R5I Red data input(MSB)30R4Red data input31R3I Red data input32GNDP Power ground33R2Red data input34R1Red data inputRORed data input(LSB)36GNDP Power ground37DCLKSample clock38GNDP Power ground39L/RI Select left or right scanning directionNote 440U/DSelect up or down scanning directionNote 4.5Note 1: Pin3 is used to adjust brightnessLuminanceBrightLuminanceDarkDuty(o%Duty(100%)Note 2: ADJ signal0-3.3V; Operating frequency: 100 Hz 25K HzF=100 Hz x 25K Hz3.3VOVThe copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-TT-12Date:2008/1120Page: 4/20Note 3: DE Mode: Mode=H,, HS floating and vs floatingHV Mode: Mode=L "and DE floatingNote 4: Selection of scanning modeSetting of scan control inputScanning directionU/DL/RGNDUp to down, left to rightVccGNDDown to up, right to leftGNDGNDUp to down, right to leftCCVccDown to up, left to rightNote 5: Scanning direction refer to the figure belowUpRGEResolution: 800(RGB)X480LeftRightDown量售有,止任何的使用The copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-TT-12Date:2008/1120Page: 5/203. Operation Specifications3.1. Absolute Maximum RatingsValuesItemSymbolUnitRemarkMinMaxCC0.36.0Power voltageLED5.5Input signal voltage-0.36.3Operation TemperatureTOP2070Storage TemperatureST3080Note: The absolute maximum rating values of this product are not allowed to be exceeded atany times. A module should be used with any of the absolute maximum ratingsexceeded, the characteristics of the module may not be recovered, or in an extremecondition, the module may be permanently destroyedThe copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-T12Date:2008/11/20Page: 6/203.2. Typical Operation ConditionsValuesItemSymbolUnitRemarkMinTyp.MaxCC3.13.33.5v Note 1Power voltageLED4.85.05.2V Note 2Icc250300mACurrent consumptionLED500550 aNOte 3Input logic high voltage0.vCcCCNote 4Input logic low voltage00.3VLED life time20.000Hr Note 5Note1: Vcc setting should match the signals output voltage(refer to Note 4)of customer'ssystem boardNote 2: LED driving voltageNote 3: LEd driving currentNote 4: DCLK DE HS. ys.ro-R5,G0-G5 B0-b5Note 5: The "LED life time"is defined as the module brightness decrease to 50% originalbrightness at Ta=25C and vld=5. 0V. The LEd lifetime could be decreased ifoperating VLED is larger than 5.0V量售有,止任何的使用The copyright belongs to InnoLux. Any unauthorized use is prohibitedINNOLUXSPEC NO.:A070-83-T12Date:2008/11/20Page: 7/203.3. Power SequencePower Supply vccData SignalPower Supply VLED50 mSect2≥200mSect3≥200mSecNote: Data Signal includes DCLK, DE, HS, Vs,RO-R5, G0-G5, B0-B5量售有,止任何的使用The copyright belongs to InnoLux. Any unauthorized use is prohibited